Please read entire listing:
We're pleased to introduce to the BMW N54 community the (775RS). We were the first to design & build these turbos in 2016. These units are built from the ground up utilizing newly designed castings (No Cores Needed). These turbos were designed to give you all the benefits of a TD04L Turbocharger while maintaining everything you love about the OEM turbochargers. The end result is a set of turbochargers that spool/respond like the OEM turbochargers but don't run out of steam at 5400 rpms like the OEM units. These turbochargers make power from the second you hit the throttle at any Rpm point thank to some of these special features Listed Below. This is exactly what makes cars fast "Average Power Through a broad range of rpms not peak power through a narrow rpm range" we have proven this time & time again... We hold the Awd record with this set in the 1/4 mile & the highest Mph in a full weight 335i Sedan weighing in just under 4000lbs with driver on 19ss at 24psi...
ALSO: Grab your N54 turbo install kit: https://mashimarho.com/products/n54-turbo-install-kit
- TD04L 9 Blade Ultra Flow Inconel Turbine Wheel (30% More Blade Surface Area Than The 11 & 12 Blade Wheel)
- 11 Blade Ultra Flow Garrett GTX 2 Billet Compressor Wheel With Extended Tip Technology
- OEM Wastegate Actuators with Updated Thicker Rod, Billet End Link & Upgraded Billet Wastegate Pivot Arm Assembly
- Upgraded Dual Oil Port Thrust Assembly Machined From Copper Bar
- Upgraded Thrust Collar & Spacer (14mm vs 10mm)
- Component Balanced, Dynamic Balanced Than Vsr Balanced Using a State Of The Art Balancing Machine, Avg 0.5mg Or Less
- Upgraded Staggered Turbine Rings
- Upgraded 2" Compressor Cover Inlets (2" Silicone Inlets Required)
- No Cores Needed
- Tune Required!
- 18 Month Year Limited Warranty
Note.. Custom Tuning Required As There Is No Off The Shelf Tune!
VRSF 3.5" Full Exhaust
Recommended Air Filters, if you have relocated filters replace them with these as those filters are far to small. We just tested these at the proper industry standards & they flow 435cfm which is what's needed to safely run these.
Note... Group V 40W Oils Required with High Zinc, and Phosphorus content, for High Sheer Strength. Great Choices or equivalent to / Amsoil Signature Series / Redline Euro / Redline High Performance / Motul Sport
EXPECT SHIPPING IN ROUGHLY 9-14 BUSINESS DAYS
ALL CANCELLATIONS WILL REQUIRE A 25% FEE