We are an EXCLUSIVE Nelson Racing Wheel dealer. You can't get this anywhere else. We offer FREE shipping within the 48 states.
The worlds first and ONLY FULL CARBON panel that delete the OEM sunroof glass. Comes with closed cell polyurethane foam liner to seal the panel from rain or exterior conditions. Build into the core is a sound deadening core material to ensure the cabin does not have tremendous NVH increase. Anti rattle strips line the outer flange for a snug fitment and zero rattle. Full 3 - stage urethane finish UV protection.
Each unit is a panel + poly foam + Anti rattle liner.
These are the first of their kind on the BMW Platform. A true affordable FULL Carbon Fiber, Aramid and Forged Carbon BMW Sunroof Panel- This isn’t an overlay or plastic - 100% true AAA Grade Carbon Fiber! Drop weight off the highest point of your BMW. Not only will you reduce the heaviest part of the roof, but you will get the amazing benefits of substantially better/flatter braking, turn in, body roll and straight line acceleration!
THIS IS THE STREET EDITION
- 1.8lbs - 3.8lbs total weight (fibers vary by density)
- 2x2 Twill Carbon Fiber is the lightest at 1.87lbs and Forged Carbon is the heavier of the options.
- Minimum weight loss of 30 LBS - Huge benefits in every regard!
- Fully Insulated core between sheets of fiber to increase strength, reduce heat transfer into the cabin and insulate for road noise. Minimal difference compared to the OEM Sunroof.
- 2 Stage UV System, one is a top coat with UV blocking solids and the final is 2:1 HS Urethane Clear coat to ensure a lifetime of gloss and color.
- AAA Finish for show car appearance points.
- NRW “Anti Rattle” padding to insulate the panel using the OEM sheet metal mounting points. Prevents the panel from making additional noises to minimize distractions during intense driving.
- NRW Poly Seal System: a closed cell polyurethane compression seal that flexes with the chassis to ensure water or elements stay OUTSIDE the car. Allows the panel to be removed and reinstalled with zero mess.
- Uses OEM sunroof mounting points and includes 3 additional screws for mounting the rear of the panel.
- DIY install is possible however we do recommend a second set of hands to help remove the sunroof cartridge. It weighs 35lbs!
- PLEASE NOTE - THIS FULLY REMOVES THE ENTIRE SUNROOF ASSEMBLY INCLUDING MOTOR AND RAILS. IT IS (1) LARGE CASSETTE THAT CAN BE REINSTALLED IF NEEDED WITH ZERO ISSUE. FULLY REVERSIBLE.
- PROFESSIONAL INSTALLATION IS RECOMMENDED BUT NOT REQUIRED AS IT IS VERY DOABLE AT HOME.
